Functionalist and Intentionalist Explanations of the Rwanda and Essay

Functionalist and Intentionalist Explanations of the Rwanda and Holocaust Mass Murders - Essay Example The mass murder in Rwanda is a perfect example of the modern time genocide born of ethnic hatred. As compared to the Holocaust genocide, the events unfolding in Rwanda in 1994 gave birth to the systematic slaughter of more than eight hundred thousand Moderate Hutu and Tutsi. This aspect position the Rwandese massacre to being a massacre of the modern phenomenon, absorbed by rationalism, bureaucracy and technology. The massacre of the European Jews, commonly referred to by a majority of scholars as the Holocaust, on the other hand is among the genocides known to the greater percentage of the educated in the society. Between the years 1941 and 1945, European Jews ranging between five and xix million were systematically massacred by the Nazi regime (under the leadership of Adolf Hitler) in collaboration with its allies and other surrogates in the Nazi-occupied territories. Irrespective of the astonishing intensity and scale of the genocide, the prominence of the Holocaust in the recent couple of years has been far from being preordained. Having given a brief preamble of both the Rwandese and the Holocaust genocides, this paper therefore, gears towards availing an in-depth comparison between the two genocides. In addition, this paper also does evaluate both the functionalist and the intentionalists explanation of the two cases of mass murder based on the principal areas of focus such as uniqueness, precedent and generality in either case as drawn from different theoretical quarters. Comparison and Evaluation of the Holocaust and Rwanda Mass Murders When it comes to the definition of what genocide is, it somehow proves to be challenging. Nevertheless, massacres have over and again been repeated in different parts of the world. The most imperative thing to keep in remembrance is that a mass murder remains to be not only a controversial, but also a contested debate among politicians, historians, academics, fascists and nationalists. Irrespective of the noticeable differences in the context of a mass murder, neither of th e sides presents a different opinion or even repudiates the authenticity of the Rwanda and the Holocaust, nor is there sombre rejection over the principle that the Hutus and Adolf Hitler were responsible for the crimes they set off. In this event therefore, it is imperative finding a mechanism of gauging the reality beyond the Rwanda and the Holocaust massacres (Christopher 2004, p.34). As thus, there arise two schools of thought as regards to the historiography of these genocides. These schools of thought are the functionalist and the intentionalist explanations of the genocides. Intenionalist versus Functionalist Explanation of the two Mass Murders Over the past two or so decades, the most heated debate has been revolving around an erudite predisposition by and large referred to as intentionalist and an antagonistic functionalist explanation. Arguably, a great percentage of the interpretation and data so gathered on the Rwanda and the Holocaust massacres relate in one way or the o ther either in the functionalist or the intentionalist perspectives. To begin with the Holocaust genocide it is even derivable from the word itself, the intenionalists’ explanation lays more accents on the intention that the Nazis had; and from the kick off, it is undeniable that these Nazis had their minds made up to eliminate the European Jews in whichever manner, including carrying a mass slaughter on them. An approach of this kind puts emphasis on the figure of Adolf Hitler and his monomaniacal passion to do away with what he referred to as the Jewish cancer from Germany and Europe as a whole (Tom 2010, p.25). Adolf’s stance of facilitating an elimination of the European Jews is clearly evidenced by the statement he makes when addressing a journalist. He confidently declares that in the event that he assumes power, his first priority

Intercultural communication Essay Example | Topics and Well Written Essays - 250 words - 1

Intercultural communication - Essay Example It is way better than gestures some of which may be unacceptable in the patient’s culture. The use of pictorials involves provision of empty charts and marker pens, or a board where the patient is to describe his ailment or symptoms using pictures such as that of the stomach of head among others (Behar, et al. 201, pp. 476). The nurse will then point to various parts of the body to ask the questions and verify the symptoms. This will take longer as well. When the patients are unable to communicate effectively with the nurses or doctors, it means that diagnosis will be unable to be completed or will have numerous errors which may lead to more health problems with the patient. There are also other traditions which put restrictions on the type of healthcare worker they can have attending to them or the type of medication they can be provided with which hinders the treatment process as well as making the treatment process take unnecessarily longer in order to address the challenges (Srivastava, 2007, pp. 103). Behar, S. et al. (2013, October). Use of an Emergency Medical Pictorial Communication Book During Simulated Disaster Conditions. Disaster Medicine and Public Health Preparedness, 7(5): 475-480. DOI:

Aerodynamic Development Of Land Speed Record Car Engineering Essay

Aerodynamic Development Of Land Speed Record Car Engineering Essay This project is focused on the baseline aerodynamic analyses and optimisation of a Land Speed Record vehicle in terms of performance of drag and aerodynamic stability, and thereby, speed the vehicle can attain. The vehicle `Stay Gold shown below belongs to the David Tremayne, a Formula One journalist. It is his plan to break the current British Land Speed Record by achieving a speed of about 350 m/s. A photograph of the vehicle in its current form can be seen below. C:UsersCecilDesktopDSC07489.JPG Figure 1, (20)- Photograph of the Land Speed Record vehicle in its current form. In aerodynamic analyses, the prohibitive costs of conventional wind testing along with the advent of computing power, characterised by its decreasing cost has brought the applications of Computational Fluid Dynamics (CFD) to the fore front of research and industrial applications, (2). The complications of actual wind tunnel testing ranging from differences in boundary conditions to the scale and mounting of the object is covered well in existing literature, (1). CFD is a method for analysing complex fluid flow problems using numerical methods to solve the Navier-Stokes governing equations. This report begins with the study of high speed vehicle aerodynamics to understand the important physical phenomena taking place, i.e. Air flows linked with different parts of the vehicle. CFD has been established as a proven tool used to perform baseline simulations with different turbulence models, boundary conditions and grids. Consequently, the influence of compressibility by running cases with progressively faster operating speeds up to Mach 0.5 and the effects of varying the geometry of nose and body of the vehicle using low-drag fairings are studied. Literature Review: High Speed Vehicle Aerodynamics: Aerodynamics is the study of various forces when a body is in motion. As we know, any vehicle moving through a fluid experiences forces induced by the fluid on it. When a vehicle moves forward it displaces the static air in front of it and hence disrupts the air flow around the body. These induced fluid forces can be characterised into three main forces which can be represented on a Cartesian coordinate system as shown in the figure below, (19). Figure 2, (19)- Forces acting on a vehicle represented on Cartesian coordinate system The vertical force along the Z axis is called lift. In this context, the vertical force is usually pushing the car towards the ground. Lift force then would be negative. Instead, the term downforce will be used, which is the positive vertical force towards the ground. The horizontal force moving in the opposite direction as the vehicle along the X axis is called drag force. Drag force is created by the vehicles resistance to motion moving through the air. . Drag will always be negative with this axis system, although in the results it will be displayed as positive, (19). The horizontal lateral force along the Y axis is called side force which occurs due to strong cross winds or by vehicles being in proximity to each other. The magnitude of these forces depends on various factors like the geometry speed of the vehicle, mass of the fluid, viscosity compressibility. These three forces are the basic aerodynamic forces that act on a moving solid body. We concentrate on the reducing the drag force alone to achieve higher speeds. Aerodynamic Flows: There are various kinds of aerodynamic flows considered important in a vehicle ranging from flows associated with the external shape of the vehicle to the flows existing in the lubrication and cooling systems of the vehicle which are called external and internal flows respectively, (3). C:UsersCecilDesktopUntitled.jpg Figure 3, (4) Attached flows and separated flows over a body. The streamlines are the curves associated with a pictorial description of a fluid motion, in this case air particles move along the streamlines, (4). Using this definition we can differentiate the flows. When the streamlines near the solid surface follow the shape of the body, the flow is considered to be attached and if the flow does not follow the shape of the body, the flow is considered to be separated, (4). As seen from the figure above, separated flows leave behind trailing vortices which result in an unsteady wake flow which can be seen in the figure below. C:UsersCecilDesktop1-s2_0-S0167610501001611-gr11.gif Figure 4, (5) Trailing vortices in the wake of a conventional fastback car It is also important for Race Car engineers to know whether the flow is laminar or turbulent since features such as flow separation and vehicle drag can change dramatically within these two flows, (4). When a body travels in an undisturbed environment, the flow can be considered laminar. Conditions such as winds or the motion of other vehicles directly affects the flow causing turbulence. Turbulence is a chaotic and random state of motion develops in which the velocity and pressure change continuously with time, [22]. Characteristic of Aerodynamic flows: External Automotive flows can be characterised as those involving excessive flow separation, transitional flows, strong cross flows and streamline curvature with a turbulent wake interacting with the ground boundary layers, (5). The prevailing areas where the separation of air flow takes place are the front and rear windshields. This separation of air flow leads to change in pressure over the surface of the vehicle which constitutes the aerodynamic drag of the vehicle. Pockets of high and low velocities are created around the vehicle because of this separation. The variation of pressure over a vehicle is shown in the figure below and is measured by a coefficient of pressure, denoted by Cp. According to Bernoullis equation, the low pressure region denotes high velocity and high pressure region denotes low velocity. Cp is given by the ratio of the difference in pressure on any point of the vehicle to the dynamic pressure. C:UsersCecilDesktop109741_3mg.jpg Figure 5, (4) Variation of pressure over a vehicle Boundary Layer: The layer between the vehicle and the moving air where the fluid flow is stagnant or less is called the boundary layer and is a significant aspect at high speeds. When the body is in motion, a relative velocity is created between the vehicle and the air around it due to the fluid viscosity. Boundary layers may be either laminar or turbulent depending on the value of the Reynolds number. For lower Reynolds numbers, the boundary layer is laminar and the velocity changes uniformly as one moves away from the wall and for higher Reynolds numbers, the boundary layer is turbulent and the velocity is characterized by unsteady (changing with time) swirling flows inside the boundary layer, (7). In real environment it is inevitable that the boundary layer detaches from the solid body which results in a large increase in the drag on the body. So at high speeds, it is important to maintain an attached and laminar boundary layer with a streamlined shape (4). C:UsersCecilDesktopboundlay.gif Figure 6, (7) Boundary layer on a surface of a vehicle Compressibility effects: Compressibility is the measure of change in volume of the air relative to the speed. We are dealing with subsonic speeds (less than Mach 1) where the air acts as if its an incompressible fluid meaning the density will remain constant though the velocity and pressure are variable, (6). By Bernoullis principle when air enters a body or part of the vehicle, air must travel faster to get to the other side as the bypass air varying the pressure and velocity. The velocity and pressure return to their original form at the outlet. Importance of the speed of sound: Sound is the pressure disturbances radiating in all directions from the vehicle. In subsonic flight sound waves radiate from all points on the vehicle and can travel faster than the vehicle itself as shown on the figure on the left. C:UsersCecilDesktopasw.png Figure 6, (6) Propagation of sound waves in subsonic and supersonic speedsC:UsersCecilDesktopas.png As the vehicle travels at higher speeds, these sound waves pile up at the nose of the aerofoil and create shock waves as shown in the figure on the right. These shock waves are created due to change in pressure velocity of air flow and these waves cannot get ahead the originating point at the speed of sound. There are different kinds of shock waves which are discussed below. Oblique Shock waves are formed on sharp edges of the body with the air surface changing in the direction of air flow, basically on leading and trailing edges of the airfoil, (6). Normal shock waves are formed in front of a blunt body or on the body itself. The molecules pile up at the front and form a detached wave called the `bow wave, (6). Expansion shock waves are formed in the regions of separation on the body or airfoil. Shock waves are very important in high speed aerodynamics as it affects the change in direction of the fluid flow and are relatively negligible in subsonic flows. Relevance of Aerodynamic Drag: In aerodynamics, drag is defined as the force that opposes forward motion of the vehicle through the atmosphere and is parallel in the direction of free stream velocity of the air flow which can be overcome by thrust in order to achieve forward motion, (8). Generally in racing it is important to have to downforce to keep the vehicle stable on the ground. When going at speeds over 100 mph, the real drag is experienced. The aerodynamic drag is denoted by Cd and is given by the formula, Cd= Drag force/ (Dynamic pressure*Area) A body moving through a fluid experiences drag which can be divided into two components, frictional or viscous drag and pressure drag, (11). Frictional Drag is developed due to friction of fluid and the surface it is flowing on, commonly associated with development of boundary layers, (11). Pressure drag is formed from the eddying (turbulent) motions set up by the fluid as it passes over the body which is associated with the formation of wake behind the vehicle. Hence the geometry of nose and body shape plays an important role in reducing drag on vehicle, (12). The figure below shows the driving force required to propel the vehicle forward at a constant speed as a function of the aerodynamic drag. We can see that the aerodynamic drag increases proportional to the square of speed. C:UsersCecilDesktopUntitled.png Figure 7, (11) Driving Speed Vs Vehicle Speed It is also established that the drag prediction over the front of the vehicle, especially involving attached boundary layers and, subsonic flow is far easier and more accurate than the analysis of the rear of the vehicle, (11). Review of existing research, (13): Extensive research has been made in this area with detailed experimentation on the widely known Ahmed model, (12). The Ahmed model is a simple geometric body that retains the main flow features, especially the vortex wake flow where most of the drag is concentrated. This model is used as a reference model to compare our results with. An illustration of this model is shown in the figure below. C:UsersCecilDesktopUntitled.png Figure 8 Left: Geometric dimensions of an Ahmed model, Right: Computational domain The Ahmed reference model is a general car type bluff body shape which is enough for accurate for flow simulations. boundary conditions used for this problem are uniform flow at the inlet no slip on the surface of the body and a non-structural tetrahedral grid approach is applied to this geometry at Re= 4.25106, (13) . This flow was solved using incompressible Navier-Stokes formulations and the drag and pressure were measured. From the figure below, it is observed that the total pressure drag is minimal at the front portion and is high the rear slanted portion of the body. Subsonic interactions are fairly weak as the length of the body is long. C:UsersCecilDesktopUntitled.pngC:UsersCecilDesktopUntitled.png Figure 9A,(13) Contour fill field pressure Figure 9B, (13) Contour fill field velocity And as for the pressure measurements, the presence of vortices at side edges of the slant surface appears to be two dimensional with parallel isobars running over the surface C:UsersCecilDesktopUntitled.pngC:UsersCecilDesktop2.png Figure 10A Flow behind the rear side of the body, Figure 10B Streamlines in the wake Turbulent flows are completely three dimensional and unsteady. Using a time average flow, some sort of macrostructure appears to govern the pressure drag on rear end. Figure 10A shows the different wakes created due to different shapes and edges and Figure 10B shows the streamlines in wake structure. Land Speed Record (LSR) Racing: Ever since the inception of automobiles, there has always been an inherent drive to push the automobile to its limits in terms of performance and speed. Land Speed Record is highest speed achieved by an automobile on land. There are different classes and organisations with respect to the configurations of the vehicle, operating speeds and environment. The current vehicle belongs to the unlimited class, which is a special class for thrust powered vehicles which may be propelled using turbo jet engines and without any limitations over wheeled power, (14). Existing research: The closest vehicle comparable to Stay Gold LSR is the JCB dieselmax (shown below) which holds the land speed record for a diesel-powered vehicle having been driven to over 350mph breaking the world record at the Bonneville Salt Flats. The aerodynamics of the car was designed entirely using ANSYS Fluent by aerodynamicist Ron Ayers whose goal was to achieve an optimal balance between aerodynamic drag, skin force and downforce, (15). It has been observed that the Cd of the vehicle was 0.17. After running a number of simulations, it is shown that higher downforce generated by the wings increases the drag on the vehicle drastically, (16). C:UsersCecilPicturesjcb_dieselmax.jpg Figure 11, (17) Picture of a JCB dieselmax streamliner Another example is the Buckeye Bullet 3 (BB 3), which operates on a battery. This vehicle was developed using an alternate aerodynamic method. In order to test the body shape and geometry a new wind tunnel model was constructed though it is time consuming and costly. The vehicles frontal area was significantly reduced allowing the driver to be placed at an inclined position keep safety in mind, (18) though the driver in middle (DIM) configuration used in BB1 BB 2 has better performance compared to the former. BB 3 also achieves more stability because it maintains negative pitch over higher speeds ensuring the normal loads on the tyres are not reducing, improving traction and yaw stability, (18). BB 3 had a 17 % reduce in the Cd compared to its predecessors. C:UsersCecilPicturesBuckeye-Bullet-3-thumb-450255.jpg Figure 12, (18) Photograph of a Buckeye Bullet 3 at the Bonneville Salt Flats Computational Fluid Dynamics: Introduction: Computational fluid dynamics or CFD is the analysis of systems involving fluid flow, heat transfer and associated chemical reactions by means of computer based simulation, [21]. CFD is used in wide range of industries. CFd contains a set of codes structured around the Navier-Stokes Equations (NSE) that are used to solve fluid flow problems. NSE are the governing equations of Fluid dynamics which are shown below. C:UsersCecilPicturesnseqs.gif Figure 16, [22] Navier-Stokes equations of three dimensional fluid flows The NSE consists of time-dependant continuity equation for conservation of mass, time dependant conservation of momentum equations and conservation of energy equations, [22]. The integral forms of these equations are solved using Finite Volume Method (FVM) which is the discretisation method ANSYS Fluent uses. Discretisation is a method of converting higher order integral equations into a system of algebraic equations. These set of algebraic equations are later solved by an iterative method, [23]. As mentioned earlier, at higher Reynolds numbers flows are observed to become turbulent. We used turbulence models in CFD to approximately model the turbulence in real time environment and results obtained are deemed near accurate. All codes in CFD contain 3 main elements: 1.) A pre-processor, 2.) A solver, 3.) A post processor, [22]. Pre-processing: The activities involved in this stage are Definition of geometry in the computational domain Grid generation discretising the domain into smaller cells ( grid or mesh) Define fluid properties and specify the appropriate boundary conditions Solving: There are different techniques to solve numerical equations. CFD uses finite volume method which is the most established method in different softwares. The steps involved in this stage are Integration of NSE over control volumes of the domain Discretisation of resulting integral equations into a set of algebraic equations Solution of the algebraic equations using an iterative method Post-processing: A large amount of work has been put into CFD packages to visualize the data with outstanding graphics due to the increasing demand in the engineering field. Some of the most popular data visualisation tools are Domain geometry and grid display 2D and 3D surface and vector plots Streamlined and shaded contour plot At present, almost all Formula 1 teams use CFD to constantly optimise the aerodynamics of their cars for better performances in a race. The bottleneck of CFD was quick and efficient construction of a functional grid which has become more user friendly in modern times which makes it easy for meshing, [22]. Conclusions: Aerodynamics CFD play a key role in the optimisation of a Land Speed Record vehicle. The geometry, powerplant, wheel configurations and vehicle dynamics are important parameters in achieving reduced drag. Open wheel configurations cause more overall drag on the vehicle. Also the tyres effective radius changes with speed and is necessary to test the relationship between the vehicle speed and tyres geometric configuration due to constant downforce exerted on the vehicle by the wings. This was the case revealed in the JCB streamliner. Project Plan: Study Vehicle Aerodynamics Understand the various aerodynamic flows involved in a vehicle. Get a good grip on High Speed Aerodynamics. Read about Importance of the speed of sound in achieving high speeds and influence of compressibility. Computational Fluid Dynamics (CFD) Reading on the background of CFD and understand how Navier-Stokes equations are derived, Numerical discretisation of equations using Taylor series. Understand turbulence modelling, grid sensitivity and boundary conditions relevant to the problem. CFD Tutorials Tutorial 1 Create basic geometry for backward facing step (2D). Tutorial 2 Create basic geometry for lid driven cavity (2D). Tutorial 3 Create 3D model of cylindrical body with a rectangular grid and run simulations. Gantt chart: C:UsersCecilDownloadsAerodynamic Development of LSR (1).png Progress to date: With the help of Dr. Carl Gilkesons CFD tutorials, creating meshes of basic geometrical shapes and running simulation on them was possible. The first tutorial involves creating the geometry in Design Modeller for lid driven cavity. The mesh was created in ANSYS Mesh and running simulations with specified boundary conditions, velocity pressure was done in ANSYS Fluent. In the figure below, the mesh for the lid driven cavity is shown. C:UsersCecilDesktopCavity- Vel Contours.png Figure 13A Mesh for lid driven cavity Figure 13B Velocity contours on the top wall of the cavity C:UsersCecilDesktopCavity.png The mesh was solved for 1000 iterations and were run on the top wall with a transitional velocity of 1.4607e-03 (Re=100), ensuring the flow is laminar. The velocity contours are filled and can be seen in figure 13B.The second tutorial involves creating a backward facing step. This model is solved (1000 iterations) for turbulent conditions so a turbulence model (k-epsilon) was created and specified with an inlet velocity of 40m/s. Also this model is discretised to second order upwind for momentum, turbulent kinetic energy and turbulent dissipation rate. The results are shown below. C:UsersCecilDesktopUntitled.png Figure 14A- Mesh for Back Facing Step Figure 14B- Velocity contours on the backstepC:UsersCecilDesktopMesh Backw step.png It is noted that the horizontal component of the velocity is negative behind the step as the flow reattaches after detaching due to high Reynolds number, [20]. 3D model of a cylinder: I:Ansys projectscylinder.jpg Figure 15A 15B(below) Mesh for 3D cylinder in a rectangular grid In the figure above, a cylindrical mesh in a rectangular grid was created in ANYSYS Mesh. A rectangular grid is created in the domain to solve finite volume system of equations and to get more accurate solutions. The model was solved for constant pressure at the inlet to get reversed flow on all faces using hybrid initialisation as seen below. I:Ansys projects12.jpg References [1] P.R. Spalart, Strategies for turbulence modelling and simulations, Boeing Commercial Planes(Feb 1999). [2] W.H.Hucho, Aerodynamics of Road vehicle 4th edition. [3] `New Directions in Race car aerodynamics, Joseph Katz. [4] Joseph Katz, `Race Car Aerodynamics, 2nd edition. [5] ] Ahmed, S. R. , Gawthorpe, R. G. and Mackrodt, P. -A.(1985) Aerodynamics of Road- and Rail Vehicles, Vehicle System Dynamics, 14: 4, 319-392 [6] `High Speed Aerodynamics, Seminar, Harry L Whitehead. [7] http://galileo.phys.virginia.edu/classes/311/notes/fluids2/node11.htm [8] http://www.pilotfriend.com/training/flight_training/aero/drag.htm [9] http://www.princeton.edu/~asmits/Bicycle_web/blunt.html [10] Miles Jackson , B. Taylor Newill and Perry Carter ,Racecar Aerodynamic Optimization for an E-1 Class Streamliner Using Arbitrary Shape Deformation , SAE Technical paper 2007-01-3858. [11] Hiroyuki Ozawa, Dai Higashida,`Development of Aerodynamics of a Solar Race Car, Honda RD, 1998 SAE. [12] SiniÃ…Â ¡a Krajnovic, Lars Davidson, Flow Around a Simplified Car Part 1: Large Eddy Simulation, [13] `CFD Modelling of Flow around the Ahmed vehicle model, Gerardo Frank and Jorge DElia, Centro Internacional de Metodos Compucionales en Ingeneria. [14] http://www.landspeed.com/archive/classroom/classlsrbasics.html. [15]http://www.newmaterials.com/News_Detail_Aerodynamics_of_jcb_dieselmax_car_designed_entirely_with_cfd_code_fluent_9408.asp#axzz2H86gSGFW [16] `Aerodynamic Development of Buckeye Bullet Electric LSR, Carrington Bork, Department of Mechanical Engineering, Ohio State University. [17] http://www.carsbase.com/photo/photo_full.php?id=45469 [18] www.buckeyebullet.com/BB3.html [19] `Fundamentals of Vehicle Dynamics, Thomas D. Gillespie, Society of Automotive Engineers, 400 Commonwealth drive, Warrendale, PA 15096-0001. [20] CFD tutorials, Dr. Carl Gilkeson, University of Leeds. [21] http://www.grc.nasa.gov/WWW/k-12/airplane/nseqs.html [22] `An Introduction to CFD, H K Versteeg and Malasekara, 2nd edition.

Christopher Columbus Essay -- Christopher Columbus Essays

The skills and qualities required of Christopher Columbus in order for him to lead a safe and successful voyage to undiscovered and unexplored lands weighed heavily on him, as he was initially placed in a headship position in the course of the planning of the journey because he originated and entertained the idea of finding a passage to China through unmarked waters. With his assiduousness and persistence, his appeal and intelligence, he was able to convince the King and Queen of Spain to fund his trip. These issues, along with the fact that he had never been a captain on a ship, began the fulfillment of a dream built on nothing. These steps taken were the foundation of what would be a great hero and leader.   Ã‚  Ã‚  Ã‚  Ã‚   One valuable attribute in any man in who is put into a dangerous position of both power and responsibility is the ability to keep a close connection between the leader and the follower, which often determines the success of the leader’s mission. In Columbus’ case, it was the capability to unite a crew, who, through storms, shipwrecks, disease, dissension, and even death, remained united enough to make several voyages to the â€Å"New World.† He, and leaders in general, must give an additional effort to motivate to cohorts in order to initiate and expand this alliance that is crucial to the attainment of goals.   Ã‚  Ã‚  Ã‚  Ã‚   Another essential quality considered necessary for Columbus to command his expedition was a secure code...

Discuss symbolism of death in `Don`t go gentle into the good night Essay

Dylan Thomas’ â€Å"Do Not Go Gentle Into That Good Night† is arguably the most famous villanelle compose in English. The poem’s subject is death; more specifically, the death of Thomas’ own father. Critical interpretations of the poem uniformly praise the poem’s imagery and symbolism, while popular appraisals of the poem center around the poem’s simplicity of language and its easily memorable, repeated lines. Though technically restrained and simple from the standpoint of language and imagery, the poem creates complex tensions and associations by the changing emphasis of the repeated words and imagery. By causing the reader to read the same, repeated words, each time with a different emphasis on meaning and imagery, Thomas attained a depth and profundity in his villanelle which seems to take the form itself to an entirely new plane of expression. Part of Thomas’ extraordinary capacity to express deep themes in the villanelle form is derived from his capable use of symbolism throughout the poem. Because the poem is about death, the symbolic associations in the poem which are tied to Thomas’ conception of death provide the primary emphasis for the poem’s expression and tension. Merely by reading the title, the reader is furnished with Thomas’ first and most dynamic symbolic association with death — â€Å"That Good Night. † Death is symbolized by a â€Å"good night† which indicates both departure and (through logical progression) the eventual rising of the sun, or resurrection. The tension of the poem is squarely evoked, also, in the title with the verb â€Å"go† providing another symbolic association with death, that of motion, travel, departure and movement. Both associations, â€Å"good night† and â€Å"go† imply activity beyond death. So the admonition â€Å"do not go† by implying stasis, begins the central tension of the poem, right from the title. Lines 2 and 3 extend the symbolism of death into a more complex series of associations, one which includes overtly negative evocation â€Å"Old age should burn and rave at close of day;/ Rage, rage against the dying of the light. † Here death is symbolized by the â€Å"close of day† and as a â€Å"dying† light. The admonition to â€Å"not go† becomes an impassioned verb â€Å"Rage, rage† and also â€Å"burn and rave. † Though not explicitly stated, the connotation is that life = day, so death = night. By all logic night and day follow one another, of course, so life beyond death is implied in Thomas’ symbolic associations with death. Further symbolic association with death is made by Thomas use of blindness and sight to differentiate between the dead and the living. â€Å"Grave men, near death, who see with blinding sight/ Blind eyes could blaze like meteors and be gay,† and again there is good reason to read sight and blindness as interchangeable states, with Thomas so implying that life and death are the same. Meanwhile, with each refrain of the poem, he implores â€Å"Do not go gentle into that good night/ rage, rage against the dying of the light† and this is where the suspense and emotion of the poem are generated. The final symbolic association with death that is woven into the poem is Thomas’ use of the term â€Å"sad height. † These words imply heaven but also the grief of mortality in one unique phrase â€Å"And you, my father, there on the sad height,/Curse, bless me now with your fierce tears, I pray. † The suspense of the poem is broken, finally, by the refrain — which by now, the reader realizes cannot keep the subject of the poem (or anyone) from their appointed time with death. because the symbolic associations of the poem describe death as a both unknown but possibly beautiful and renewing state of being, the poem has sustained tension and ambiguity. Thomas crafted a poem which posited his subjective experience of his father’s death and his subjective associations with the consequences and realities of human mortality. The poem relies on symbolic associations of a universal and enduring nature to describe a complex interrelationship between life and death and the joy and despair of mortality. It is due to these associations that Thomas’ poem has become one of the most celebrated if not the most celebrated villanelle in English.

Diet Analysis Paper

The three-day diet analysis was interesting. There were many positive attributes to it and definitely negative ones. Over the course of the three days, which were Friday, Saturday and Sunday: and figured this would give a good depiction of what I was consuming on a regular basis. In some places I was consuming more than I should be and in some I was consuming less than I should be. There were also those places were I was getting just the right amount. It is so interesting to me to be able to find out what I am consuming and how I am consuming it. Being an active male, it was most interesting of what I ate, what my average of the three days were, and the plan on how I would correct the way I eat to make it a more healthier lifestyle. My Pyramid was not that shocking, when I saw Grains, fruits, vegetables, milk, meat, and bean intake compared to the recommendation. Personally, it made sense of what I was meeting and what I was missing, yet, have done nothing about it. I love my grains, even though I am a celiac. I do not really follow the guidelines and still chose to eat a lot of grains. This was at 10. Oz and I met the required intake for grains. The vegetables I tend to eat are broccoli, carrots, and from time to time I eat cauliflower. So, I was at 1. 2 cups of vegetables compared to the recommended intake of 4. 0 cups. I already knew I hardly reach the fruit intake that happened to be zero percent. I have never been a big fruit person, besides eating apples to keep the doctors away. Got milk? Of course, I always drink my milk when I eat all the grains out of the cereal bowl. Thus, I was at 1. 5 cups compared to 3. 0 cups of the recommended intake. Lastly, meat and beans I was at 5. 5 oz and cheated, because I ate at taco bell! Overall, the above groups did not surprise me and did show me how far I still was to reaching the food-list compared to the latest USDA Dietary guidelines. My actual intake for Protein was at 83. 30 grams and exceeded the recommended by 8. 91 grams. When looking at the meal assessment, lunch was when I received the most protein during my three-day analysis. I normally eat out during lunch, because I am either at school or work and it is convenient. I usually do not think of whether or not I am cooking the right foods that have a good amount of protein at dinnertime, and rely on fast-food chains. Since, I am over on my protein intake I am not worried about having to rely on fast-food to get the appropriate amount my body needs. Carbohydrates (carb) for me were at 206. 36 grams when it should be at 554. 37 grams, so not exactly where I need to be. Again, my carb intake was the highest during lunchtime. The foods highest in carbs high in starch or sugar would be found in the grains (Cinnamon Toast Crunch), starchy potatoes (French fries), and any foods with added sugar. Low carb foods I consumed were the meat (lunch and dinner), eggs (breakfast), and the small portion of vegetables (broccoli and carrots). Total fat was 63. 9 grams compared the 125. 43 grams of total fat recommended. Also, my saturated fat was 18. 16 grams when listed at 40. 32 grams of recommended intake. Not too sure on fats, except from the fact that the key is to replace bad fats (saturated and trans) with good fats (poly and monouns) in our diet. Knowing which fats will raise my LDL cholesterol and which ones will not is the first step to lowering my family’s history of heart disease. Cholesterol was 254. 51 mg, which was very close to my recommended intake. If there is one thing I learned so far this semester, it is to eat foods that are low in cholesterol, saturated fat, and free of trans fat. I have never had a screening done before, yet, seeing that my Cholesterol was fairly high, I might reconsider. Being an athlete I know I can use all the fiber I can get to keep my digestive system clean. During the three-days, I only took in 17. 20 grams and I should be consuming at least 56. 44 grams. Fiber can be found in fruit (I did not eat during the trial), vegetables (I ate very little), and wheat foods that were most likely the main source I got the fiber from. On an infomercial with Montel was selling his new â€Å"Health Master† blending machine. During his spiel, he started talking about how the majority of us add salt to foods that already have a good source of salt. I found it interesting, because I know I do this when I get chips or chili. From what I got, the key to healthy eating is choosing foods lower in salt, sodium, and try to not add extra salt to foods (unless your mother’s cooking is bland). Well, I had a very high intake of sodium of 2,730. 78 mg when it should have been at 2,300 mg. I usually stop by the blood pressure machine when at the grocery store and it tends to be good. So, I am not too worried about having to choose a low-sodium diet, unless it becomes a trend when being over my intake level. Astonishingly, my vitamin intake was really good, and I am somewhat surprised by that. There were only two Vitamins I was low in enough to talk about were vitamin C at 69. 19 mg Folate, which was at 273. 60 mcg of my recommendation of 400 mcg. Minerals seemed to be average for me, with potassium, magnesium, and calcium (I have to take extra by pill form) being the lowest out of the eight listest on the report. Calories, calories from fat, and calories from Saturated fat were all low for me as well. I am a guy and unfortutely I do not count my calories, however, I have a cool application on the I-phone that is a calorie counter! The diet analysis opened my eyes and realized that I do not know what I am really doing to my body. My feelings are different after finding out the true facts. Knowledge is the key to a healthier lifestyle, and the diet analysis program has helped a lot. Goals I need to set for myself are balancing out what I am eating, try to learn as much as I can on the subject of nutrition, and be more aware of what options are available to me when I go out to eat during lunch (smaller portions). Those are problems that I would like for my to correct.

Conflict and Resolution Concepts

Conflict and Resolution Concepts Introduction In any organization or setting where people are working together, a conflict is inevitable and for healthy relations among workers there has to be a certain measure of disagreements. However, the conflict is not a problem although how we deal with it makes the difference. Therefore, the success of any organization is not depended on the lack of conflicts but on the process applied to resolve them.Advertising We will write a custom essay sample on Conflict and Resolution Concepts specifically for you for only $16.05 $11/page Learn More While resolving employees’ grievances, it is important to give unlimited attention to their grievances and address the conflict effectively. This ensures that every employee is satisfied and comfortable with their job hence better productivity. This paper seeks to address the sources of the clashes, cultural issues contributing to the conflict, information required to deal with the disagreements as well as t he best method of addressing the same. Sources of conflict In the case of the XYZ-Company, it is possible that the interpersonal squabble that is seen among the employees is caused by prejudice. The company has just merged with another foreign company in an attempt to access the global market. The conflict could be arising due to differences in cultural and organizational behaviors since the organizations had different working settings. Employees from the foreign country may feel like they are being sidelined in the decision making process for the management of their company has been taken over by the XYZ-company. Equally, the latter could be undermining employees of the acquired company by enforcing their rules and organizational. Cultural issues contributing to the conflict In such a case where two companies have merged to form a single company, there are a number of things that must be considered in order to have a harmonious transition. To avoid conflicts, the management must le arn and respect the other company’s way of doing things. Acquiring a company along with its employees means taking over an existing social setting. Effecting change in the way people interact is quite a challenge. Employees from either of the two companies may want to feel superior to the each other hence giving rise to a supremacy contest. Another underlying issue could arise from the remuneration procedure. The two companies may have different strategies with regards to wages and salaries and a change in the pay package may affect the workers of the acquired company.Advertising Looking for essay on social sciences? Let's see if we can help you! Get your first paper with 15% OFF Learn More The conflict may have been influenced by organizational differences either small or large. The employees may be disagreeing over their different cultural or organizational values, motivations, perceptions, idea or desires (Segal Smith, 2013). Humans have a natural urge of seeking to feel needed since everyone wants to feel nurtured, supported and understood (Masters Albright, 2002). Professional and personal relationships can therefore be greatly affected by how much we feel safe and comfortable in our place of work. Different cultural settings express someone’s worth in different ways. Some of the cultural aspects that could be affecting the merged company could be a language barrier. This creates an â€Å"us /them† situation hence causing isolation which can be detrimental to the company. Information needed to solve the problem In order to effectively address the conflict issues in the XYZ-company, a conflict consultant will require some amount of information. Most of the conflicts in an organization arise from lack of equity in company’s resource allocations (Masters Albright, 2002). Therefore, it would be of great importance to interrogate how the company distributes its resources among its workers. Another aspect t hat needs to be examined is the manner in which the company governs its employees. Employees will rebel if the management is not treating them in a manner that assures their security and safety. As a conflict consultant, I would try and identify the ethnic differences between the employees of the two companies. This will assist me in dealing with the two parties’ identity crisis. The most effective method of addressing the problem To deal with the conflicts arising in the XYZ-company, my best recommendation would be the emotional awareness conflict resolution skill. In an organization, people of different personalities are interacting and expected to work together in harmony. The same people have different ideas and perceptions on everything they do together or individually. The emotional awareness skill helps individuals to understand themselves and also understand others (Segal Smith, 2013). This creates the conducing environment for harmony where mutual understanding is t he common factor. By understanding how a person feels and why he feels that way enables him or her to communicate effectively and resolve disagreements in a sober perspective. Conclusion This paper has discussed some of the possible underlying sources of the conflicts arising in the XYZ Company as influenced by its merging with a foreign company. Prejudice and cultural diversity have been mentioned as the most prominent causes of the conflict. The paper also goes ahead to discuss the cultural issues that may be causing or contributing to the conflict.Advertising We will write a custom essay sample on Conflict and Resolution Concepts specifically for you for only $16.05 $11/page Learn More Organizational behaviors, values and perceptions have been cited as the greatest contributors to the cultural difference between the workers. This assumption is drawn from the fact that the company acquired a foreign company hence merging with foreign workers. In addition, this essay has identified some the information required in order to thoroughly address the conflict in the company. Emotional awareness has been recommended as the most effective method of addressing the conflict issue in XYZ. References Masters, M., F. Albright, R., R. (2002). The Complete Guide to Conflict Resolution in the Workplace. New York, NY: AMACOM. Segal, J. smith, M. (2013). Conflict Resolution Skills. Web.

Sex Education Essay

Sex Education Essay Sex education is a process that begins at birth and continues until the day you die. It is a process of building a strong foundation for sexual health. There are many misunderstandings and non-factual opinions that go along with this topic even though it is constantly discussed. It includes sexual development, reproduction, intimacy, gender roles and relationships. Sexual education should begin at home. Parents and guardians ought to be the primary instructors of sex education for their children. Daily, parents should take advantage of every opportunity to teach this subject to their children. From the beginning of a child’s life, they learn how to respond to affection, show love, and how to react in different types of relationships. Children even learn about their sexuality when their parents speak to them, change their clothes, play with them or teach them their body parts. As they progress from children to teenagers or adolescents they continue to learn about their sexualities consistently. However, some parents and guardians are very uncomfortable about talking about or providing information about sex or sexual education. They are either too embarrassed about talking about the extreme topic of sex, afraid of providing to much information to push their children to act on what they have told them or shy of not knowing the answers to th e questions that their children might ask. Honest, open communication between parents and children through childhood, pre-teen, adolescent and young adulthood can help young people to mature into sexually healthy adults. Research has shown that parents and children have a range of discomfort levels when it comes to discussing sexuality. School-based sexuality education complements and supplements the sexuality education children receive from their families, religious and community groups. Therefore, due to the necessity of school-based sexuality education it is in my opinion that it be a part of the curriculum for students in the Bahamian High Schools that is junior and senior high. This course needs to be taught in the various high schools for a number of reasons including: to students to build a strong foundation, to decrease teenage pregnancy, to make students aware of Sexually Transmitted diseases and prevent them from occurring, to teach about abstinence, which is the better way and to inform the students about sexual orientation and homosexuality. The primary goal of sex education in the schools should be to help young people to build a foundation as they mature into sexually healthy adults. These programs should assist young people in understanding a positive view of sexuality, provide them with information and skills about taking care of their sexual health and help them make decisions about solving problems now and in the future. According to my interpretation, sex education should provide an opportunity for young people to develop and understand their values, attitudes, and beliefs about sexuality. This course should help young people to develop relationships and interpersonal skills and help them to exercise responsibility regarding sexual relationships including addressing abstinence, pressures to become prematurely involved in sexual intercourse and the use of contraception and other sexual health measures. Teenage Pregnancy is very rampant in today’s society. In a conversation with a senior high school teacher, she related that at least two young ladies from each senior class graduates being pregnant. She went on to say that this did not include the numerous others who end their classes prematurely as a result of their pregnant state and their inability to continue with regular schooling. What do you think is the cause of this? In my opinion the cause of pregnancies among these teenagers is incorrect education about sex from peers or neighbors or no sex education at all. If these students were educated from their entrance into the high school program with a sexual education class, the outcome might have been different. This does not mean that they would not have experimented with sexual intercourse or the opposite sex, it would have meant that they would have been better prepared to deal with the decisions or choices that they made. Sex education needs to be implemented in the h igh school coursework to make teenagers or pre-teens aware of the consequences of unprotected sex. Each of these teens or preteens will or have gone through puberty, therefore they need to be very well educated as to what can occur if they are sexually active, even for just one time. Sexual education would not stop teenage pregnancies but it indeed reduces them. Homosexuality is another topic that sexuality education will discuss. Teenagers come into contact with homosexuals on a day to day basis. They are forced to deal with homosexuality in their homes, their neighborhoods, their churches and even in their schools. These students are in their teen or adolescent years where they are learning about who they are and what their feelings mean. In my opinion, homosexuality is a misunderstanding, one that can be easily adopted by teenagers who are easily misunderstood. If they are not taught about both heterosexuality and homosexuality, they can easily fall prey to the homosexuals who are lurking in the society’s shadows. Sexual education would encourage heterosexuality- healthy relationships between males and females. It would teach students about sexual preference and that homosexuality is not hereditary. It would also help students to deal with feelings toward the same sex and with homosexuals that they come in contact with. Some may say that if teenagers are taught about sex and sexuality that their interest in it will intensify thus, resulting in experimentation. Although this might indeed be a true statement that teenagers are very curious, â€Å"curious minds will experiment.† Sexuality education is not an either or proposition. The reality is that young people need and deserve information about abstinence and contraception. Sex education would teach that sexuality is a natural, normal part of life. Abstinence from sexual intercourse is the most effective method of preventing unintended pregnancies and sexually transmitted diseases, including HIV/AIDS. Abstinence is in fact the better way. Adolescent or pre-teens should be encouraged by not only their parents to delay sexual acts until they are physically, cognitively and emotionally ready for mature sexual relationships and their consequences. The coursework of sex education would offer them a wide range of information exclusively on abstinence until marriage. Interventions that are effective in encouraging teenagers to postpone sexual intercourse helps them to develop interpersonal skills they need to resist premature sexual involvement. For interventions to be most effective, teenagers need to be exposed to these programs before they initiate intercourse, preferably during their high school years. The sex education curriculum when implemented into the high school system will be designed to promote knowledge about human development and reproduction, to make students aware of the consequences of all types of sexual activity, and to promote young people’s respect for and appreciation of themselves, their families and others. This implementation would in fact help to reduce teenage pregnancy, for the reason that important topics such as puberty, sexual health and hygiene, reproductive systems, pregnancy and contraception will be focused on. These topics will discuss abstinence, condom use, diversity, pregnancy options, safer sex and sexual behavior. Students have to be encouraged to accept the shared responsibility of pregnancy prevention by teachers explaining the consequences of premature and unprotected sexual activity, urging responsible decisions about sexual intercourse, and encouraging healthy, respectful and safe male and female relationships. You can order a custom essay, research paper, term paper, thesis or dissertation on Sex Education topics from our professional custom essay writing service which provides students with high-quality custom written papers.

Age of the Joker (2012) by Edguy

As seen with their newest album, Space Police, these are crazy people when it comes to power metal. Toby and the gang have made somwthing a bit more special with this release here. This is really where they pull out all the stops to be funny. For these guys, forget the term power metal, instead use the term Comedy Metal because thats what this band really is. Age of the Joker is an album that has many a good tracks in it to keep you on your toes. My personal favorite is the track 2 Out of 7 which is more like a love song gone wrong. The final stretch of the song also has the greatest line ever in power metal history. You know a songs good if it could catch you off guard in a good way like that. Believe me it did, I wasnt hardly listening to it until that line came up and slapped me in the face. This has also made an appearence on The Metal Voices top 10 albums of 2012 making Number 4 I believe. I love this album with a passion and would love to own it on a vinyl and/or CD. I recommend you check this out if you love power metal, you can say you like Iron Maiden and would may still enjoy it. A sfor the rating I give it a 10/10.

The effectiveness of Hong Kong Law on antipirate relating to Essay

The effectiveness of Hong Kong Law on antipirate relating to Information technology - Essay Example In the 1990s, Hong Kong was the piracy capital of Asia, if not even the world. Compared to literature, music and movies, computer software is a comparatively new type of intellectual property. It is universally accepted that information technology piracy is protected by patent, trademarks and copyright laws, therefore the relevant legislation are to be studied to determine if there are any shortcomings, and also the other underlying factors which contribute to this phenomenon of piracy in Hong Kong are investigated before any conclusions are to be drawn. However, software is protected under the very similar legislations that administer music, literature, movies and other copyrighted content. Copying software illegally is not any different than illegally copying any of these forms of intellectual property - and the punishments for doing so are equally harsh (Anti-Piracy). Pirated software could be bought openly, cheaply and safely everywhere from the Golden Shopping Arcade (GSA) and Computer 33 Plaza in Shumshuipo to the "Internet Zone" at Whampoa Gardens and the Sinoplaza in the Mong Kok section of Kowloon (Wong, 2005). Hong Kong retail information technology and computer software piracy was also found in cyberspace. In August of 1996, the Business Software Alliance (BSA), working closely with the Alliance Against CD-ROM Theft (AACT), closed down an Internet site called Sammy Game Center, which offered illegal CD-ROM products for sale and export to the United States, the Netherlands, Sweden and Canada, via the net. Over the past several years, advances in computer software have brought us time-saving business programs, educational software that teaches basic skills and sophisticated subjects, graphics programs that have revolutionized the design industry, Internet applications that help connect us with other computer users, and an increasingly compl ex variety of computer games to entertain us (Pramog). As the software industry grows, everyone stands to benefit (Anti-Piracy). The areas of the law which specifically applies to information technology and computer software are closely looked into, and the types of legal remedies on offer are mentioned. The various other factors which affect information technology and software piracy are also discussed. It is noted that the various areas which affects the efficient enforcement of the legislation and explores the reasons why policing of anti-piracy laws are so problematic are also elaborately identified. It is attempts to provide solutions to tackling this problem of information technology related piracy. The purpose of this research paper is to examine the various factors which affect different kinds piracy related to the information technology in Hong Kong, with the aim of hoping to understand the reasons behind such activities, and attempts to suggest ways of tackling the problem. Generally speaking, a piracy in IT dector is someone who copies a program that is normally sold for a price but without paying f or using it. There are different existing piracy scales which been mainly used for examination the effectiveness of anti-pirate

Marks & Spencer Essay Example | Topics and Well Written Essays - 3000 words

Marks & Spencer - Essay Example The company's preferred method of returning cash is by using the B shares scheme. Since it does not want to use the traditional share repurchase, it has created a conversion of shares – for every 21 current ordinary shares, investors will receive 17 new ordinary shares along with 1 B share for every current ordinary share (Marks & Spencer Plc 20020). The purpose of the conversion is to decrease the company's shareholding without using the traditional repurchase approach, while the use of B shares intends to give back the cash by redeeming it under two choices (Vandermewe 2003).  This B share scheme has offered both the company and the investors with regard to payout policy. The scheme addresses both the concerns of investors when cash is distributed by using the traditional shares repurchase, as well as their concerns when funds are distributed by increasing the amount dividend payout – that is, the high amount of income taxes that investors incur when they receive di vidends (Hakanson 1982). From the point of view of the company, it also uses this scheme in order to leverage certain payout policy theories.  For one, the B share scheme addresses the issues of payout policy such as information asymmetry, residual theory, and expectations theory (Keown 2002). When the company has decided to return the  £2 billion to its shareholders, it aims to reorganize its capital structure in line with the strategic changes that aims to implement (Marks & Spencer 2002). However, if the company chooses to repurchase its stock, investors will be skeptical about the company's moves and would have a more risky perception of the company, thus affecting the company's price/earnings ratio and the value of the stock (Brealey & Myers 2003). As with residual theory, the level of the cash that should be given back to the investors should be its residual earnings, after additional profitable investments have been made (Keown 2002).

Amnesia Essay Example | Topics and Well Written Essays - 2000 words

Amnesia - Essay Example There are other details of amnesia of this kind which vary according to different conditions. In contrast functional or psychological amnesia has been classically retrograde meaning the person is not able to recollect past experience. With the recent surge in awareness of relation between body, cognition, intellect, and mind, a newer branch of science, namely, cognitive neuropsychiatry examines this psychic disease process more intensely. In this assignment two articles, one from the news or popular lay media and the other from scientific experimental literature will be examined critically in order to find out the scientific information and knowledge update related to psychological amnesia with the basic research hypothesis, although no organic brain lesion has been demonstrated in functional amnesia, there is a solid scientific basis and cause effect relationship for this type of amnesia. Killian (2009) in his article titled "Amnesia put her life on hold; now, she's graduating" in May 15, 2009, NewsRecord describes the case of Marshall, who following a bout of viral encephalitis in the senior year of her high school had amnesia. This followed an illness of high fever, followed by loss of memories. The author quotes Marshall's experience of sudden loss of memory, which led to loss of all touch to her old and acquainted environment, and following this incident, she could not remember anything of her past life, and it was something like "first memory of the world" at all. She could not recognize any one in her family, but she could remember habitual works such as "tying the lace of my shoes." This illness led to her admission to the hospital where her stay lasted for 7 days. During this time, it was diagnosed that the infection involved certain areas of brain where certain types of memories and skills were affected. After coming back home, the previously used practiced tasks were difficult to do, and she needed help in her household chores. There was obviously an identity crises where she failed to recognize herself, family, or even personal things as her own. Her academic achievements in the school before this incident were outstanding, both in studies and extracurricular activities. She had been a outgoing student at North Iredell High School. She was a musician and a drum major in the school band. After this incident, she was withdrawn and shy, and her former friends appeared to her as strangers, and this led to considerable alienation. There was obviously a change in her personality, but her amnesia contributed to it in a greater extent. Her mother pursued her educations, and since she had enough credits from her school, with her grades she was accepted in many schools. On the day of her high school graduation she could not make out what is graduation, and how it was important for her, although her family was very happy for her. A break came while she followed a program Starting Over, when she decided not to join college and decided that she will have to rebuild her connections with the real world. She was growing but very slowly, and in this reality TV show, she came to realize what she had lost and how she can progress in her life with new goals. Meanwhile, she joined college with her brother, and she decided to major in communications. She is expected to graduate soon. This news is a report of an incident where the author has taken poetic license.

Analysis on the Organizational Structure of Oman Air Essay

Analysis on the Organizational Structure of Oman Air - Essay Example The Sultanate of Oman’s Civil Aviation founded the Oman Air, which began its operation in 1993. Prior to that event, in the year 1970, the Oman International Services was inaugurated. It was followed by the establishment of Oman Aviation services on 1981 with an aim to expand its services offered to other airlines such as in cargo handling and ground handling. With the operation of Oman Air, this company was responsible for creating a traffic hub in Muscat, which led to the growth of the tourism industry, commercial, and industrial. The company first offered direct flights in Colombo and Dubai, then succeeded by Trivandum, Kuwait, Karachi, and Sri Lanka from 1993-1994. In 1995, it started to open direct flights in India, Bangladesh, and Dhaka. The destination offered expanded, but it started to limit its operation since 2003. In 2005, it commenced to offer other destinations until it expanded internationally. Oman Air was introduced as the new identity of Oman Aviation Service s (SAOC) on April 21, 2008 (Oman Air, 2012e). The company commits itself in providing quality services to its target markets, which is construed by 28 awards they received from the independent sector. The company was recognized as the Best Airline Worldwide 2011 based on the survey conducted by the travel magazine (Oman Air, 2012f). SWOT Analysis Strength Oman Air has monopolized the airline industry since it is considered as the national carrier within the country. There is no competition involved because the government owns 99.825% while others have a percentage of 0.175 (Oman Air, 2012a). The government is primarily bounded in its marketing campaign, which will increase the tourist in Oman. Since it is the flag carrier of the Sultanate of Oman, it has been widely known in the country. The market presence of Oman Air is relatively high. Moreover, Oman is notable for its hospitality. The company desires to render comfort for customers while they travel across the countries. Furthermore, Oman Air leaves an impression of their services based on the international standards with emphasis on quality and safety. Oman Air was the first airline that offered satellite telephone and internet connection. The investment in green technology strengthened the brand name of Oman Air because modern facilities and aircraft reduced carbon emission. Weaknesses The internal structure of Oman Air reflects its weakness. Due to the poor performance of every department, the profitability of the company is affected. The large organizational structure of the company needs good leadership and management. The departmentalized structure divides the attention of the CEO, which weakens the interdepartmental communication. The poor management of HR resources in recruiting technical and administrative tasks leads to the poor performance of every department. It results to the staged strike by the Oman Air employees, which aim for higher wages (Pollack, et al., 2011, p.181). The conflict inside the Oman Air is influenced by politics regarding on poor management and corruption. The strike reminds the employers to provid e opportunities for employees. Lastly, the culture of Oman Air has not yet altered despite the deviation in the cultural background of its staff. Opportunities Monopolization in the airline industry provides opportunities for the business operation of Oman Air. This company is the only air carrier that offers services globally. When there is no competition, the company can be secured of its profitability and sales. Oman Air has no apprehension on the prices of air fare. Thus, Oman Air caters to the large market of travellers in its country. According to Rajasekar and Moideenkutty (2007, p.128), the population of travellers in Oman is about 800, 000. Furthermore, modern facilities such as â€Å"new passenger terminal, a brand new cargo terminal, new engineering facility, and in-flight catering facility† can elevate the profitability of Oman Air. The customers’

Basic LAW Essay Example | Topics and Well Written Essays - 1000 words

Basic LAW - Essay Example The business that has been decided to be set up is that of transport business. This business operation will deal with lending car on rental basis to the tourists’ companies which operates with planning trips for the tourists. Australia is an attractive location for the tourists and thus holds good scope for the business. The cars will be bought new for providing them on rental to the tourists’ companies. The business will operate on the type of â€Å"sole trader†. Thus the aim of this paper is to evaluate the advantages and disadvantages of sole trading business along with the other forms for comparing and thus to justify this choice of the business form. The name of the business would be â€Å"Lark Travels†. Lark is the name of a songbird. The benefits and the drawbacks of registering names for business will also be evaluated in this paper. Sole Trader Business: Advantages, Disadvantages, Legal Requirements and Liabilities of the Party Sole trader which h as been selected as the form of the business is known to be as the most inexpensive and the simplest structure to be set up. The best way to have a business name is to have it by the trader’s own name; otherwise the trader needs to register the business name with Consumer Affairs Victoria. The sole trader holds the entire liability of the business. The liability holding does not vary in case if the business is registered with a name other than his or her name. An income declaration is essential to be included by the sole trader; the income which is earned from the business. A business plan is required in case the sole trader is opting for taking loan from any of the financial institutions. The tax is paid by the sole trader at a rate of personal tax, although he or she may be required to pay provisional tax. The liability of sole trader business is unlimited and can even broaden up to sole trader’s personal assets inclusive of any assets which are owned jointly with an other person. The advantage of sole trader business is that it bears low fees of establishment. The entire control over the business lies with the sole trader and he enjoys the entire profit from the business. During low business profits, there exist taxation advantages. There is applicability of less legislation in this business form. The only two legislations applicable are Contract Law and Tax Assessment Act. Despite the advantages, the sole trading business can pose as a risk towards the trader’s personal finances. The capital deems limited by the sole trader’s personal assets and also there prevails limited expertise of the trader. He is subjected to unlimited legal liability and he is solely responsible for all the debts and liabilities. At times, it may become hard to ‘pass on ownership’1. Partnership Business: Advantages, Disadvantages, Legal Requirements and Liabilities of the Parties Partnership businesses are similar to the sole trader busin

Cando processes of globalization help alleviate poverty Essay

Cando processes of globalization help alleviate poverty - Essay Example (Aart, 2005) There are also sources that use "modernization" as a synonym for globalization, and it is sometimes subsumed under "liberalization," "Neoliberalism," and "post-modernism." Globalization may be seen as a structure, a process, an ideology, or a combination of these. Proponents of globalization see it as, "A force which is beneficial to all, individuals and states, in all parts of the world" (George& Wilding, 2002). Opponents of globalization see it "as of benefit to the upper groups in society, to the multinational companies and the affluent world; and as detrimental to the satisfaction of public needs," and as a "force for the perpetuation and accentuation of inequalities within and between groups of countries for the benefit of multinationals and the upper classes. Its constant emphasis on increased competitiveness involves a race to the bottom". A number of factors have led to the process called "globalization." As large corporations began diversifying their products and services by buying up smaller enterprises-usually for stock market, income tax or other financial benefits-they became conglomerates. By then merging with similar-often-overseas-conglomerates, they became huge international entities known as MNCs (Multinational Corporations). The economic breakdown of the Soviet Union gave further impetus to globalization as many foreign firms hurried to establish units in so-called economies in transition. Free trade agreements of various kinds further supported this process. MNCs now account for between a quarter and a third of the world's output, 70 percent of world trade and 80 percent of direct international investment. Perhaps more importantly, international financial institutions, including aid agencies, put conditions on their aid or loans. The World Bank, for example, plays its part by demanding open trade channels as a condition for financial help. Even the partial integration of Europe and the introduction of the Euro made business across former boundaries easier, and consequently, "MNCs are increasingly organizing production and service provisions on an international basis" (Held & McGrew, 2003). The International Monetary Fund strongly advocates less or no government intervention in the economy, but its preconditions for loans have grown from about a dozen to over eighty, thus dictating the economic policies of countries vulnerable to its restrictions. The activities of international banks and aid programs like the IMF, the World Trade Organization and World Bank are not without immediate consequences for working people, and particularly for the poor. The role and activities of some of these organizations are worth quoting: The World Trade Organization was designed as a meeting place where willing nations could sit in equality and negotiate rules of trade for their mutual advantage, in the service of sustainable international development.

Basic LAW Essay Example | Topics and Well Written Essays - 1000 words

Basic LAW - Essay Example The business that has been decided to be set up is that of transport business. This business operation will deal with lending car on rental basis to the tourists’ companies which operates with planning trips for the tourists. Australia is an attractive location for the tourists and thus holds good scope for the business. The cars will be bought new for providing them on rental to the tourists’ companies. The business will operate on the type of â€Å"sole trader†. Thus the aim of this paper is to evaluate the advantages and disadvantages of sole trading business along with the other forms for comparing and thus to justify this choice of the business form. The name of the business would be â€Å"Lark Travels†. Lark is the name of a songbird. The benefits and the drawbacks of registering names for business will also be evaluated in this paper. Sole Trader Business: Advantages, Disadvantages, Legal Requirements and Liabilities of the Party Sole trader which h as been selected as the form of the business is known to be as the most inexpensive and the simplest structure to be set up. The best way to have a business name is to have it by the trader’s own name; otherwise the trader needs to register the business name with Consumer Affairs Victoria. The sole trader holds the entire liability of the business. The liability holding does not vary in case if the business is registered with a name other than his or her name. An income declaration is essential to be included by the sole trader; the income which is earned from the business. A business plan is required in case the sole trader is opting for taking loan from any of the financial institutions. The tax is paid by the sole trader at a rate of personal tax, although he or she may be required to pay provisional tax. The liability of sole trader business is unlimited and can even broaden up to sole trader’s personal assets inclusive of any assets which are owned jointly with an other person. The advantage of sole trader business is that it bears low fees of establishment. The entire control over the business lies with the sole trader and he enjoys the entire profit from the business. During low business profits, there exist taxation advantages. There is applicability of less legislation in this business form. The only two legislations applicable are Contract Law and Tax Assessment Act. Despite the advantages, the sole trading business can pose as a risk towards the trader’s personal finances. The capital deems limited by the sole trader’s personal assets and also there prevails limited expertise of the trader. He is subjected to unlimited legal liability and he is solely responsible for all the debts and liabilities. At times, it may become hard to ‘pass on ownership’1. Partnership Business: Advantages, Disadvantages, Legal Requirements and Liabilities of the Parties Partnership businesses are similar to the sole trader busin

The Reasons for the Popularity of Plastic Surgery in Recent Years Essay Example for Free

The Reasons for the Popularity of Plastic Surgery in Recent Years Essay Outline: a. Children Should /Should Not Be Left Fortunes Nowadays, whether children should be left fortunes has been a controversial issue. As far as I am concerned, children should not be left fortunes for the following reasons. First of all, children may be extravagant with the money that is left to them. Secondly, children were too small to have a right value of money. Finally, children can really experience life from pressure. All in all, it’s more wise that children should not be left fortunes, which may make children really experience all aspects of life. b. Books or Films should be censored As our society become increasingly complicated, books and films also have been affected in their contents. Because of the existence of some harmful information, books or films should be censored. In the first place, people in reality will be affected in their conducts by the violence in books and films. Besides, censorship is a necessary step to protect children from those harmful things. In addition, censorship also do good to our society. To sum up, many people will benefit from censorship. Therefore, books or films should be censored. c. People’s Worth Is Shown in the Reward they Earn Different people vary in the points of view on people’s worth. For me, people’s worth isn’t only shown in the reward they earn. First, there is no doubt that the reward they earn is a part of their worth. Besides, what they have made to contribute to society is the important part to show their worth. All in all, people’s worth is shown not only in the reward they earn but also in the contribution they make to our society. d. Opportunity and Resolution Is the Key to Success As we all know, success depends on various factors. Among them, I think opportunity and resolution is the key to success. First at start, opportunity can lead you to success because opportunity always waits for people who have prepared well. Then resolution will promote you to put into practice, which can make you become closer to success. In a word, although there are many other factors would affect success, opportunity and resolution still is the key to success. e. Yuanming Yuan (the Round Bright Garden)Should or Should Not Be Restored Yuanming Yuan, as our great historical relics, has been destroyed many years ago. I strongly hold that it should be restored. First, it should be restored in order to remember the humiliation we have suffered. Second, we should educate our descents though this. What’s the most important, it’s the great masterpieces of our ancestors and bears our cultural relieves. All in all, we should definitely rebuild our Yuanming Yuan. f. Clothes Make a Man or Cosmetics Make a Woman People are not always perfect. But to some extent, clothes make a man or cosmetics make a woman. First, people can cover their weaks through proper clothing and make-up. Then what they wear and look like can embody their inside. In a word, appropriate clothing and make- up make people. Composition: g. In recent years, plastic surgery has been very fashionable, especially among young people. They think it is important for their sense of self-confidence regarding their appearance, or in getting a job. What is your opinion about plastic surgery? Please write an essay on the following topic. The Reasons for the Popularity of Plastic Surgery in Recent Years In recent years, plastic surgery has become very popular especially among young people. The motive of people who accept plastic surgery varied. But in my opinion, there are two main reasons for the popularity of plastic surgery in recent years. In the first place, it can enhance their sense of self-confidence regarding their appearance. Because we all know that people who will do plastic surgery are often not satisfied with their own appearances. The effect of plastic surgery cannot be underestimated, which would really improve one’s thought to their appearance. A good appearance will make people feel confident to everything. Besides, plastic surgery can help in getting a job. In such a crucial society, a good appearance can help in some kind of work. Although we thought it is unfair, this phenomenon still exist in our society. We can’t deny it but to enhance ourselves. From what have been listed above, we may reasonably arrive at the conclusion that plastic surgery really dose help in many aspects. But I hold that beauty is only skin-deep, and we should try our best to become a competent and well-trained person.

Responsibility of Health Promotion in Nursing

Responsibility of Health Promotion in Nursing Health promotion as defined by World Health Organization is â€Å"a health strategy that aims to incorporate skills and community development and to create supportive environment for health, endeavors to build healthy public policy and looks at re-orienting health services. (WHO, 1986). Health promotion is strongly rooted in a social philosophy that attributed the etiology of ill health to adverse social conditions rather than medical care. Both theoretically and practically, health promotion has been found wanting in addressing equity and social justice concerns. Also, structurally and traditionally, the formal health system often produces major obstacles to meaningful involvement in health promotion and community empowerment activities. The communities do not have the interest and the capacity to make any tangible contribution to community participation even if they are willing to do so but the basic concepts of health promotion which have their root in ancient civilization has be en developed in the last two decades. The purpose of health education is to strengthen the skills and capabilities of individuals to take action, and the groups or communities to act collectively to take control over the determinants of health bringing about positive change It serves as essential guide in addressing the major health challenges encountered by developing and developed nations including communicable diseases and issues associated with human development and health enabling people to take action either as individuals or groups. Also, it is an avenue to encourage individuals to take preventive measures in averting worsening of an illness or disease and to adopt healthier lifestyles. Health promotion programs have proven to be an effective tool in slowing the growth of healthcare costs and reducing chance of suffering from disease and creating supportive environments for health backed by healthy public policy. (Bennett, Perry Lawrence, 2009). The responsibility of a nurse in health promotion and education is considered as a major factor by numerous researchers and policy initiatives from the government to promote health, understanding that health promotion is essential. In the three journal articles selected for review from the GCU Library which incorporates the three levels of health promotion namely; primary, secondary, and tertiary, the nursing responsibilities were described to include; educating and helping people obtain skills to maintain their health, making efforts to better understand the patients and their conditions in order to provide effective care because mutual understanding between a practitioner and patient is the key to giving quality care. The nurses must have an evidence-based knowledge of the significant effect that can be made through health promotion interventions and communicate this understanding to the community at large. As more people grow in their awareness of activities that lead to good heal th and become knowledgeable about their own health status, the health of their families, the overall health of the population will improve. Knowing that health promotion encompasses a broader spectrum and include social and political interventions that could provide change to services and policies in the community promoting social responsibility for health, nursing roles and responsibilities have evolved in health promotion by allowing nurses to promote health in diverse settings like homes, schools, prison, general practice and workplace contrary to the past when it was limited to hospital settings only. (Watson, 2008). The implementation of health promotion starts from setting priority , assessing needs and program planning stages, according to the journal article reviewed from GCU Library, the topic being; â€Å"Collaboration between primary and secondary/tertiary services in oral health†, the process includes: capturing high level support by re-orienting health services , building links with primary care and reducing inequality, creating health promotion team in a way that individuals will have a role and more innovative ideas, workforce development, developing health promotion policy, collecting data that will drive the health promotion initiatives, helping to assess health interest and risks thereby helping to guide the kind of health program to offer, choosing appropriate health promotion initiatives that flow nationally from data so as to address the prevailing risk factors of the people, crafting annual health promotion so as to promote continuity, giving encouragement opportunities a nd rewards, maintaining leadership and innovation, communicating with everyone involved in the program throughout, monitoring regularly and consistently evaluating the outcomes. The process of executing the program must include; education of the nursing staff, education of the patients and family, screening, individual risk factor assessment and immunization, social marketing and health information, health education and skill development, community action. Settings and supportive environments, Health education is an important factor of health promotion. As described by Naidoo and Wills (2000), the three levels of health education are: Primary prevention which is health promotion activities that prevent disease. For example immunization, it’s a holistic idea of positive health that encourages the achievement and maintenance of a suitable level of health which enables every individual to lead a productive life both socially and economically. Secondary prevention aims at shortening episode of illness or disease by hindering the progression of ill health through prompt diagnosis and treatment limiting disability. An example is screening also known as† health maintenance†. It is the domain of clinical medicine. It is more expensive and less effective than primary prevention. Tertiary prevention help limit complications related to a disease or a state after it has been developed by minimizing suffering caused by existing departure from good health and promote the patients adjustment to irreversible conditions such as cardiac rehabilitation. In line with the literature review from the GCU Library journal article, I agree with the fact that approach to health promotion should be the one that demonstrate a range of values and beliefs that are commonly held because an individual’s approach will be influenced by their own beliefs and that of the profession they represent. According to Ewles and Simnett (2003), these approaches include medical approach, beviour change approach, educational approach, e empowerment approach, and social change approach. In conclusion, According to Ewles and Simnett(2003), theses approaches includes behavior change, medical, educational, empowerment and social change. When relating it to the literature review from the GCU library journal article approach towards health promotion should be the main focus because it reveals a range of values and beliefs that are commonly held based on an individual’s approach or believe and the profession they represent. References; Edelman, C. Mandle. C. L. (2010). Health promotion throughout the life span (7th ed.). . St Louis: Mosby Naidoo J, Wills J (2000) Health Promotion) Foundations for Practice (2nn ed) Edinburgh. Watson M (2008) the health promotion general practices. Quality in primary care 16.  3, 177-185 Ewles L, Simnett I (2003) Promoting Health A Practical Guide. (5th Ed). Edinburgh. www.healthvicgo.au; steps in health promotion. Jan 25, 2011. Retrieved on 12/18/2011 WHO, Ottawa chapter of Health promotion .Geneva WHO, 1986. Article published.  Online, Oxford Express, 2011. Bennett . C, Perry J. Lawrence Z (2009) Nursing standard. 2009 Jul 29. Journal- Health  Promotion. CINAHL Database. Collins, Fair N. Dickinson. A .Peacock. K. Primary health care (2009). Feb 19. Collaboration between primary and secondary/tertiary services in oral health.

Intertextuality in Buffy The Vampire Slayer :: Television Shows TV Essays

Intertextuality in Buffy The Vampire Slayer A vivid and 'realistic' subjective experience of TV dramatic fiction is almost axiomatic of viewer enjoyment. To feel a personal engagement with the depicted events, to experience a sense of the fictional space as subjectively real and to become drawn into that space are arguably defining features of enjoyable television viewing, as they are of film and of literature. In this paper, I will argue that certain forms of intertextuality play a key role in producing this experience. In cult TV shows like Buffy the Vampire Slayer (BtVS), these forms of intertextuality are used in abundance, and BtVS is therefore an excellent vehicle for exploring their psychological impact. Krzywinska (2002) notes that BtVS demands a sophisticated level of engagement by viewers, and that this is encouraged by a number of strategies, including intertextual references. She notes that the show makes many references, for example to shows such as Xena and the novels of Anne Rice, and that these are 'Part of a common cultural vocabulary that connects characters to a broader "real" world culture. Such references lend the series a greater sense of meaningfulness, and textual richness, further encouraging discussion between viewers and helping to interlace the Buffyverse with everyday life' (p 190). Other references to the 'real' world (for example the fact that Giles is said to have brought many of his books from the British Library, and the frequent use of the Internet): provide an important way of linking the diegetic world to other texts, to history, and to viewers' cultural knowledge This is important to the series' project of making connections with viewers' lives: the aim of which is to build a cultural vocabulary gleaned from the "real" world that is common to both viewers and characters' (pp 192 3). For Krzywinska, such devices make the audience attentive and make the viewing experience richer and more rewarding. However, the argument presented here will be that such intertextuality has further psychological effects that serve to draw the viewer into the fantasy world of BtVS and to intensify the feeling of involvement. So that the rewards for the viewer go beyond merely 'catching the references'. At this point, it seems necessary to enter into a brief discussion of what I am assuming by the term 'the viewer'. What follows is fundamentally a textual analysis of the positions that BtVS makes available or offers us, and invites us to take up (however, as will become clear, I am in no way suggesting that these subject positions are identificatory in the usual sense.

Isaiah 10:1-6 The Hebrews Prophets: Isaiah & Amos :: essays research papers

Isaiah 10:1-6 The Hebrews Prophets "Woe to those who make unjust laws, to those who issue oppressive decrees , to deprive the poor of their rights and withhold justice from the oppressed of my people. Making widows their prey and robbing the fatherless. What will you do on the day of the reckoning, when disaster comes from afar? To whom will you run for help? Where will you leave your riches? Nothing will remain but to cringe among the captives, of fall among the slain.. Yet for all this his anger is not turned away. His hand is still upraised. â€Å"Woe to the Assyrian, the rod of my anger, in whose hand is the club of the wrath! I send him against a Godless nation, I dispatch him against a people who anger me, to seize loot and snatch, and to trample them down like mud in the streets." These writings, from the enscriptures of the bible some say philosophical, inspire mystery, wonder and the relation to how true they are. I have a monotheistic way of thinking, though the bible is said to be the writings of the way of life of Moses and the Hebrews, I am puzzled by how certain writings pertain to society, culture and the life of man and women today. As I try to decipher this passage in my own words of Isaiah. One is speaking of the oppression committed by man upon man. It is Jesus asking why man whom were created as brother and sister making unjustly laws...deprive the poor of their rights...withhold the justice from the oppressed of my people. I strongly believe there is a judgment day. For all the wrongs committed in society against one another and against oneself; as the sacred body that be. Harming thy brethren, killing thy neighbor, steeling. All to satisfy the wants for themselves. It is all competitive. Part of my heritage being of Blackfoot Indian descent, the way of life is to create and live life from the gifts of nature in which thy God provided. I can almost guarantee the society today living of monetary value, would not know how to survive if everything all of a sudden were taken away. A sudden exhausting rainfall, which flooded the cities, and devoured the homes, and cars, and other belongings. Some consider this to happen on Judgment Day or the day of Reckoning. As a punishment for man creating these evil doings. People today are so encompassed in the American Way of Living they cannot sacrifice for a minute to live without..forks, eating with thyne hands.

Seminar Topic on Mnc

A  multinational corporation  (MNC) or  multinational enterprise  (MNE)[1]  is a  corporation  enterprise that manages  production  or delivers  services  in more than one country. It can also be referred to as an  international corporation. They play an important role in  globalization. Strategies Corporations may make a  foreign direct investment. Foreign direct investment is direct investment into one country by a company in production located in another country either by buying a company in the country or by expanding operations of an existing business in the country. 2]  [3] A  subsidiary  or daughter company[4]  is a  company  that is completely or partly owned and wholly controlled by another company that owns more than half of the subsidiary's  stock. [5][6] A corporation may choose to locate in a  special economic zone, which is a geographical region that has economic and other laws that are more free-market-oriented than a country 's typical or national laws. [edit]Communication between different cultures Multinational corporations need to deal with different cultures of their employees, partners, suppliers and customers.Cross-cultural communication  (frequently referred to as  intercultural communication) is a field of study that looks at how people from differing  cultural  backgrounds communicate, in similar and different ways among themselves, and how they endeavour to  communicate  across cultures. Intercultural competence  is the ability of successful  communication  with people of other  cultures. A person who is interculturally competent captures and understands, in  interaction  with people from foreign cultures, their specific concepts in  perception, thinking, feeling and acting.Earlier experiences are considered, free from  prejudices; there is an interest and  motivation  to continuelearning. [edit]Conflict of laws Main article:  Conflict of laws Conflict of laws   is a set of procedural rules that determines which legal system and which  jurisdiction's  applies to a given dispute. The term  conflict of laws  itself originates from situations where the ultimate outcome of a legal dispute depended upon which law applied, and the common law courts manner of resolving the conflict between those laws. In  civil law, lawyers and legal scholars refer to conflict of laws as private international law.Private international law has no real connection with  public international law, and is instead a feature of local law which varies from country to country. The three branches of conflict of laws are * Jurisdiction – whether the forum court has the power to resolve the dispute at hand * Choice of law – the law which is being applied to resolve the dispute * Foreign judgments – the ability to recognize and enforce a judgment from an external forum within the jurisdiction of the adjudicating forum [edit]GlobalizationMult inational corporations are important factors in the processes of  globalization. National and local governments often compete against one another to attract MNC facilities, with the expectation of increased  tax  revenue, employment, and economic activity. To compete, political entities may offer MNCs  incentives  such as tax breaks, pledges of governmental assistance or subsidized infrastructure, or lax  environmental  and  labor  regulations.These ways of attracting  foreign investment  may be criticized as a  race to the bottom, a push towards greater autonomy for  corporations, or both. MNCs play an important role in developing the economies of developing countries like investing in these countries provide market to the MNC but provide employment, choice of multi goods etc. On the other hand, economist  Jagdish Bhagwati  has argued that in countries with comparatively low labor costs and weak environmental and social protection, multinationals actua lly bring about a ‘race to the top. While multinationals will certainly see a low tax burden or low labor costs as an element of comparative advantage, Bhagwati disputes the existence of evidence suggesting that MNCs deliberately avail themselves of lax environmental regulation or poor labor standards. As Bhagwati has pointed out, MNC profits are tied to operational efficiency, which includes a high degree of standardisation. Thus, MNCs are likely to adapt production processes in many of their operations to conform to the standards of the most rigorous jurisdiction in which they operate (this tends to be either the USA, Japan, or the EU).As for labor costs, while MNCs clearly pay workers in developing countries far below levels in countries where labor productivity is high (and accordingly, will adopt more labor-intensive production processes), they also tend to pay a premium over local labor rates of 10 to 100 percent. [7]  Finally, depending on the nature of the MNC, inves tment in any country reflects a desire for a medium- to long-term return, as establishing plant, training workers, etc. , can be costly.Once established in a jurisdiction, therefore, MNCs are potentially vulnerable to arbitrary government intervention such as expropriation, sudden contract renegotiation, the arbitrary withdrawal or compulsory purchase of licenses, etc. Thus, both the negotiating power of MNCs and the ‘race to the bottom' critique may be overstated, while understating the benefits (besides tax revenue) of MNCs becoming established in a jurisdiction. [edit]Transnational CorporationsA Transnational Corporation (TNC) differs from a traditional MNC in that it does not identify itself with one national home. Whilst traditional MNCs are national companies with foreign subsidiaries,[8]  TNCs spread out their operations in many countries sustaining high levels of local responsiveness. [9]  An example of a TNC is Nestle who employ senior executives from many countri es and try to make decisions from a global perspective rather than from one centralized headquarters. [10]  However, the terms TNC and MNC are often used interchangeably. edit]Criticism of multinationals Main articles:  Anti-globalization  and  Anti-corporate activism Anti-corporate advocates criticize multinational corporations for entering countries that have low  human rights  or environmental standards. [11]  They claim that multinationals give rise to huge merged conglomerations that reduce competition and free enterprise, raise capital in host countries but export the profits, exploit countries for their natural resources, limit workers' wages, erode traditional cultures, and challenge national sovereignty.